PRODUCT USER MANUAL & WARRANTY SCOPE

The products are for accessory purposes only. It does not contain any warranty against transportation or impacts.

I.Use & Maintenance Information

Although the product is produced using high-quality raw materials, it may be affected by environmental conditions. Regular maintenance can significantly eliminate such risks and guarantee optimal protection and a good appearance for a long time. Maintenance of the products is provided by regular periodic cleaning process.

Cleaning and Maintenance of Products

• It is recommended to clean the products once a week, taking into account environmental and air pollution conditions.
• Dust on the surface and parts adhering to the surface from the external environment are washed and cleaned (the stainless steel surface must be free of all dust and other adhered substances).
• The surface is cleaned with neutral general cleaning products (detergent, soap powder) that do not contain chlorine or compounds, using a cleaning cloth, chamois, sponge or soft brushes.
• After cleaning is completed, the surface must be rinsed with clean water and dried.
• Abrasive substances that may scratch the surface should not be used during cleaning.
• Metallic particles may adhere to the surface of stainless steel parts due to external factors during use (metal particles from exhaust and brakes and from the external environment). Since these particles accumulated on the surface corrode the stainless steel surface over time if regular cleaning is not carried out, small brown spots defined as flugorist begin to form in these areas. This situation can only be prevented by regular cleaning.
• This deterioration of the exterior surface due to neglect can be eliminated by applying fine polish.
• Wax: Stainless Steel Polish is applied to the surface as a thin layer, then distributed over the surface with circular movements without pressing with a soft cloth and polish. This process is repeated 2-3 times.

II. Matters to be Considered During Transportation

• Products must be transported in their original packaging. Although the packaging is designed to be resistant to impacts, the products should not be thrown away or quickly left on the ground during transportation and storage.
• Products must be received from the cargo or shipping company after the package has been opened and checked. In case of any damage to the products such as bending, bending, scratching or breaking, a damage report must be prepared by the cargo or transportation personnel.

III.Information on Installation

The installation of the product must be carried out in accordance with the installation guide instructions.

Matters to be taken into consideration during assembly

• The installation of the product must be carried out in accordance with the installation manual instructions.
• Connection apparatus should be checked after being placed on the chassis.
• Before connecting the product to the vehicle, the connection legs must be installed on the product body and then connected to the vehicle.
• The connection legs have been galvanized and are resistant to rust. No operations (painting, cutting, etc.) should be performed on the connection legs.
• After all connections are completed, it must be checked that all connection screws on the vehicle and the body are tightened thoroughly.
• It is recommended to check the product's connection screws and tighten them every time the vehicle is maintained at the service, in case the product's connection screws become loose over time.

WARRANTY

These products are guaranteed for 2 (two) years against chemical reactions such as discoloration and mold growth within the scope of proper care and usage conditions. If you encounter a problem as stated within the warranty period, you should apply to the authorized service from whom the product was purchased, along with this document (product sales invoice).

• The repair period of the product is maximum 1 month. The time spent in repair is added to the warranty period.
• The products are for accessory purposes only. It does not contain any warranty against transportation or impacts.

In the following cases, the customer's claims for free repair or free replacement under this warranty will be invalid.

• Bending, bending, scratching, crushing, breaking, etc. that may occur on the product as a result of a vehicle accident or external impact.
• Damages such as scratches, dents, breaks on the product as a result of stone splashes and the resulting rust or decay.
• Mold or rust problems that may be caused by industrial spills or external harmful factors (salt water, very dusty environment, bird droppings, etc.).
• Application of non-standard polishing, cleaning or abrasive chemicals on the product by the user as specified in the usage and maintenance instructions.
• Interference with the product other than the authorized company.
• Problems that may occur in the product as a result of natural disaster.
• Invoice issued by the authorized service or company.